English  Español  Deutsch  Français  Italian  Portuguese  Russian  Arabic 

 

CuCo1Ni1Be - CW103C Cobalt Nickel Copper Beryllium Alloys

A).CuCo1NiBe Details

CuCo1Ni1Be—CW103C Cobalt Nickel Beryllium Copper Alloys

CuCo1Ni1Be—CW103C (DIN 2.1285) Cobalt Nickel Beryllium Copper Alloy contains approximately 1% Cobalt, 1% Nickel and 0.5% Beryllium. After hot forging and heat treatment processes this material gains considerably hardness, electrical and thermal conductivity as well. It is possible to have different combinations of electrical conductivity and hardness by changing the heat treatment conditions;CuCo1Ni1Be also Offers good strength and hardness characteristics coupled with conductivity in the range of 45-60 percent of copper with ultimate tensile and hardness properties approaching 140 ksi and RB 100 respectively, all of its properties are quite the same as CuCo2Be-C17500 and CuNi2Be-C17510.

 

Typical Application for CuCo1Ni1Be - Cobalt Nickel Beryllium Copper Alloys

 

Electrical: Fuse Clips, Switch Parts, Relay parts, Connectors

Industrial: Spot Welding Electrodes, Electrode holders and Seam Welding discs in Resistance Welding, Plunger Tips in Aluminum Die Casting Machines, Injection Nozzles, Cooling Pins in Plastic Injection Machines, Mulds for Casting of Non-Ferrous Materials, Tooling for Plastic Moulds ,Butt Welding Jaws, Contact Tips for Submerged-Arc-Welding

 

Available Sizes:

Custom Diameter & Sizes, Random Mill lengths

 

Available Products (forms):

Round bars, Flat bars, Square bars, Rectangular bars, Hexagon bars, Plates, Sheets

Custom shapes are available upon request.

 

B).

CuCoNiBe - Cobalt Nickel Beryllium Copper Alloys

Chemical Composition 

Be: 0.40-0.70%

Co: 0.80-1.30%

Ni: 0.80-1.30%

Cu: Balance

Note: Copper plus additions equal 99.5% minimum.

 

C).

CuCo1Ni1Be - Cobalt Nickel Beryllium Copper Alloys

Typical Physical Properties

 

Density (g/cm3): 8.83

Density before age hardening (g/cm3): 8.75

Elastic Modulus (kg/mm2 (103)): 14.10

Thermal Expansion Coefficient (20 °C to 200 °C m/m/°C): 17 x 10-6

Thermal Conductivity: 209 W/m · oK at 20 C

Melting Range (°C): 1000-1070

 

Note:

1). the units are based upon Metric.

2). the typical physical properties apply to age hardened products.

 

 

D).

CuCo1Ni1Be - Cobalt Nickel Beryllium Copper Alloys

International Specification

 

Rods/Bars/Tubes: ASTM B441, SAE J461,463; RWMA Class 3

Sheets: ASTM B534

Wires: ASTM B441

Plates: ASTM B534, SAE J461,463; RWMA Class 3

 

European Standards: CuCo1Ni1Be, DIN 2.1285; CW103C to EN

 

Note:

ASTM: American Society for Testing and Materials

SAE: Society of Automotive Engineers

AMS: Aerospace Materials Specification (Published by SAE)

RWMA: Resistance Welder Manufacturers' Association

Note: Unless otherwise specified, material will be produced to ASTM. 

 

E).

CuCo1Ni1Be - Cobalt Nickel Beryllium Copper Alloys

Mechanical Properties:

The Mechanical Properties will be available on request from customers.

 

Most Commonly Temper Used:

 

Rods/Bars: A(TB00),H(TD04),AT(TF00),HT(TH04)

Sheets: A(TB00),1/4 H(TD01),1/2 H(TD02),H(TD04),AT(TF00)

Wires: A(TB00),1/4 H(TD01),1/2 H(TD02),3/4H(TD03),H(TD04)

Plates: AT(TF00),HT(TH04)

 

F).

CuCo1Ni1Be - Cobalt Nickel Beryllium Copper Alloys

RFQ:

Industry Spotlight

  • CHECK the ALB-ALLOY beryllium copper alloys application for Automotive Industry.
  • CHECK the ALB-ALLOY beryllium copper alloys application for Aerospace Industry.
  • CHECK the ALB-ALLOY beryllium copper alloys application for RWMA Industry.
  • CHECK the ALB-ALLOY beryllium copper alloys application for Plastic Mould Industry.

Contact ALB-ALLOY

Tel: +86-592-5607696, 5950621, 5607658

Fax: +86-592-5607657

Email:

sales@China-berylliumcopper.com

Website:

www.china-berylliumcopper.com